X

Risk Management Magazine

Search for Articles

An Icy Inlet Ingestion

An Icy Inlet Ingestion

NAME WITHHELD BY REQUEST

A sudden bang followed by a high-pitched whine is the last thing any pilot wants to hear while descending through thick clouds. Just a year after graduating from flight school, this nightmare became my reality during instrument meteorological conditions (IMC) training with an instructor pilot at a local airport. This is how a routine flight turned into a sudden battle with ice.

Freezing temperatures hovered beneath heavy, overcast skies. During our pre-mission planning, we received a valid weather briefing stating that forecasters had neither predicted nor reported icing conditions in our flight area. Because freezing weather was common for that time of year, we welcomed a briefing that permitted real-world training.

During our run-up, we completed the blade deice check even though we did not expect icing. The check verified that everything functioned properly. As a precaution, we engaged all of our anti-ice and deice equipment for the duration of the flight. We then flew for approximately two hours on a local instrument flight rules (IFR) flight plan, executing multiple instrument approaches while flying inside the clouds.

At the beginning of the flight, as part of my normal instrument crosscheck from the right seat, I monitored the ice rate meter. However, my inexperience with low flight hours and actual weather environments caused me to let the meter slip from my routine scans. While receiving vectors for our final morning approach, my eyes darted to the instrument, and I suddenly noticed it indicating heavy icing. We were flying at 4,000 feet mean sea level (MSL) — 2,000 feet above ground level (AGL) — at 120 knots indicated airspeed (KIAS). Because the meter was calibrated for 100 KIAS, it displayed slightly heavier conditions than we actually faced. Nevertheless, we immediately sought to exit the icing environment.

Because we remained in the clouds and the airport was reporting IFR conditions, we continued on our final vector and intercepted the final approach course. During the execution of the instrument landing system (ILS) approach and while descending on the glide slope, we heard a loud bang followed by a high-pitched whine. We immediately scanned our cockpit instruments, but everything registered normal. We continued down the glide slope, exited the clouds and turned immediately toward the military ramp.

Our postflight inspection revealed damage to the No. 2 engine inlet. Maintenance personnel conducted a thorough inspection but found no foreign object damage within the engine. It was later determined that a moderate buildup of ice had accumulated on the aircraft during our flight. During our descent on the glide slope, a piece of that ice shed directly into the No. 2 engine inlet, resulting in a Class C mishap.

Lessons Learned

  • Verify critical weather details: Aviators should actively seek specific details during briefings — such as cloud top heights — which are critical for finding an escape route during IFR flights.
  • Maintain instrument crosscheck discipline: Inexperienced pilots must rigorously maintain their instrument crosschecks to avoid missing critical indicators like the ice rate meter.
  • Manage airspeed to mitigate ice shedding: Reducing airspeed during an approach can slow the melting process of accumulated ice, preventing dangerous shedding into engine inlets.

Icing can turn a routine training mission into an emergency in seconds. Army aviators must remain vigilant and prepared to handle the sudden hazards that freezing environments present. Remember, safety is not a passive checklist; it is an active, continuous commitment to vigilance in every flying environment.

  • 15 November 2026
  • Author: USACRC Editor
  • Number of views: 34
  • Comments: 0
Categories: On-DutyAviation
Tags:
Print